URZ 7000 – Guillotine

logo DAVON

MACHINE DESCRIPTION

This special machine is composed of a frame, a drive mechanism, running gear and work gear. A Perkins industrial diesel engine is mounted to the frame and powers a hydraulic system used to drive the running gear and the work gear. The running gear includes the front hydraulically drive and braked axle and a rear hydraulically steered axle. The working tool is a heavy steel plate with a wear resistant HARDOX 450 replaceable lower blade. The steel plate is repeatedly positioned at a pre-defined height and is then dropped onto the paved surface.The tool moves through vertical guides in the tower and is raised and released by a hydraulically driven winch.

Work cycle

The winch raises and releases the demolition tool. The working cycling begins by raising the tool to a pre-defined height, followed by the drive disengaging and releasing the brake, which allows the tool to fall. Once it falls on the demolished surface, the tool is raised and the entire cycle repeats.

HYDRAULIC DRIVES

The Perkins motor drives one main high-pressure piston control pump via a flexible adapter to move the drive gear and the winch as well as a gear pump for auxiliary and operating functions. The piston pumps drive the winch or drive gear based on the switchboard settings; the gear pump is used to steer the rear axle wheels, flush the winch, control the main manifold, the speed and braking of the drive gear, the brake on the winch and to stabilise the swing axles.

CONTROLS

The controls are located in the driver’s cab. These are controllers and control instruments.
A remote control for the machine and cab air conditioning are available for an additional charge.

ELECTRICAL SYSTEM

The electrical circuits on the machine operate using a 24 V DC system. An alternator on the diesel engine and two 12 V/180 Ah batteries power the system.

Controls:

  • Standard controls from the cab
  • Radio remote control with colour display and camera (optional for an added charge)
Technical and performance parameters:
EnginePerkins 1204F-E44TA turbocharged, aftercooled industrial diesel engine
Maximum power110.1 kW at 1000-2200 RPM
Minimum power70.0 kW
Maximum torque560.0 Nm at 1400 RPM
Displacement4.4 litres
EmissionsEU Stage IV/U.S. EPA Tier 4 Final
Cabheated, air conditioning optional for an added charge
Working tool drive gearZOLLERN ZHP 6.24 free fall winch
Travel speed0 – 15 km/h
Working speed0 – 12 km/h
Permitted transverse tiltmax. 5°
Permitted longitudinal tilt5° when using a raised tower max. 15° when using a tilting tower
Machine height in working position4300 mm
Machine height in transport position3200 mm
Machine width2558 mm
Machine length5370 mm
Machine weight24 t
Working tool weight7 t
Working tool width1.7 m
Working tool stroke0.5 – 2.7 m
Blow frequencymax. 20 per minute at full stroke
Productivitymax. 1200 m2/h
Max. thickness of demolished surface250 mm
The manufacturer reserves the right to change these parameters.
Make an inquiry

Make an inquiry

Form loading…

Zpráva